+47 21 97 92 01 salg@advania.no
Tom handlekurv

ADAPTEC RAID 71605Q Single

Forsiden / Datautstyr / Kontrollere / Kontrollere / ADAPTEC RAID 71605Q Single
Du må logge inn for å handle/se priser.
ADAPTEC RAID 71605Q Single (ASR-71605Q SINGLE)

ADAPTEC RAID 71605Q Single

  • Porter/kontakter SAS
  • Eksterne porter Nei
  • Grensesnitt PCI-E
  • Interne porter Ja
  • RAID Ja

Adaptec Series 7Q with maxCache 3.0

The Adaptec Series 7Q SAS / SATA RAID adapters, with maxCache 3.0, deliver evolved application acceleration benefits with the industry-first read caching solution and support for fully redundant SSD write caching. Adaptec's 71605Q and 7805Q adapters can deliver up to 25x improvement in IOPS and 25x reduction in latency compared to HDD-only storage arrays.


  • 71605Q: 16 internal ports
  • 7805Q: 8 internal ports

All Series 7Q:

  • 6 Gb/s throughput at each port
  • PMC PM8015 ROC
  • Preinstalled Adaptec Flash Module (AFM-700) for Zero-Maintenance Cache Protection with 2GB NAND flash
  • Maximum performance for up to 16 SSDs (No expander needed)
  • New mini SAS HD connectors and SAS HD cables — for fit and function in dense server con figurations
  • Auto configuration of Simple Volume and HBA modes — "set it and forget it"
  • Support for up to 256 SAS and SATA devices
  • Support for SSD, HDD, Autoloader, RBOD, Tape
  • Adaptec maxCache 3.0 SSD caching support for read and fully redundant write caching
  • – Allows configuration of SSD caching pool in RAID 0, RAID 1E and RAID 5
  • – Supports up to 8 SSDs with up to 2TB of SSD cache
  • Optimized disk utilization
  • – SSDs can be partitioned and some of the capacity can be utilized as separate logical drive to the host (e.g. to boot the OS from)
  • Improve quality of service with reduced latency (25x) and accelerated IOPS (up to 25x)

Key Software Features

  • Optimized Disk Utilization
  • Supported RAID levels: 0, 1, 1E, 5, 6, 10, 50, 60
  • HBA Mode and Simple Volume Mode for automatic deployment
  • Supports up to 256 SAS or SATA devices using SAS expanders
  • Hybrid RAID 1 & 10
  • Quick initialization
  • Online Capacity Expansion
  • Copyback Hot Spare
  • Dynamic caching algorithm
  • Native Command Queuing (NCQ)
  • Background initialization
  • Hot-plug drive support
  • RAID Level Migration
  • Hot spares - global, dedicated, and pooled
  • Automatic/manual rebuild of hot spares
  • SES and SAF-TE enclosure management
  • Configurable stripe size
  • S.M.A.R.T. support
  • Multiple arrays per disk drive
  • Dynamic sector repair
  • Staggered drive spin-up
  • Bootable array support
  • Support for Tape Devices, Autoloaders

Bus System Interface

  • 8-lane PCIe Gen3

Cache Memory

  • 1024MB

Connector Configuration

  • 71605Q: Four internal mini SAS HD (SFF-8643)
  • 7805Q: Two internal mini SAS HD (SFF-8643)

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.